| INSTRUCTIONS FOR REMOVING MEMORY AND HARD DRIVE. To replace, simply reverse sequence. | ||
 |
 |
|
1. Undo top back screws |
||
 |
 |
|
2. Undo bottom front screws |
||
 |
 |
|
3. Lift top |
||
 |
 |
|
4. Unplug IDE cable from CD drive |
5. Unplug power cable from CD drive |
|
 |
 |
|
6. Lay top aside |
7. Unplug IDE from board |
|
 |
 |
|
8. Release RAM |
9. Remove RAM |
|
 |
 |
|
10. Tip Cubit onto back, undo centre screws |
11. Undo outer (front edge) screws |
|
 |
 |
|
12. Lay Cubit flat |
||
 |
 |
|
13. Unplug IDE from board |
14. Slide hard drive out |
|